Proceedings

2026

  • Rossetti, L., Borghetti, M., Serpelloni, M., Aerosol-Jet Printed and Photonically Cured Sensors Embedded in 3D-Printed Smart Orthoses: A Preliminary Study, 2026 IEEE International Workshop on MetroInd4.0&IoT 2026 – Proceedings, 2026, pp. [to be assigned], doi: [to be assigned].
  • Polidori, G., Sardini, E., Serpelloni, M., Preliminary Analysis of Aerosol Jet Printed Solid Contact K⁺ Sensors for Rapid Soil Extraction, 2026 IEEE International Workshop on MetroInd4.0&IoT 2026 – Proceedings, 2026
  • Bonomi, G., Serpelloni, M., Masante, B., Putame, G., Gabetti, S., Massai, D., Preliminary Assessment of Printed Strain Gauges for Instrumented Bioreactors, 2026 IEEE International Workshop on MetroInd4.0&IoT 2026 – Proceedings, 2026
  • Borghetti, M., Bellitti, P., Serpelloni, M., Preliminary Study on Aerosol Jet Printed Temperature Sensors for Smart Pipes, 2026 IEEE International Workshop on MetroInd4.0&IoT 2026 – Proceedings, 2026
  • Bonomi, G., Borghetti, M., Serpelloni, M., Preliminary Investigation of Printed Strain Gauges for Smart Glove Interface, 2026 IEEE International Workshop on Metrology for Automotive, MetroAutomotive 2026 – Proceedings, 2026
  • Borghetti, M., Khan, H.U., Serpelloni, M., Preliminary Analysis on Novel PDMS Based Capacitive Pressure Sensor for Wearable Application, 2026 IEEE International Workshop on Metrology for Automotive, MetroAutomotive 2026 – Proceedings, 2026
  • Borghetti, M., Bellitti, P., Serpelloni, M., Preliminary Study on Capacitive Humidity Sensors Printed on Automotive Polymer Parts, 2026 IEEE International Workshop on Metrology for Automotive, MetroAutomotive 2026 – Proceedings, 2026

2025

  • Bellitti P., Borghetti M., Sardini E., Serpelloni M. Printed Soft Capacitive Sensor for Fingertip Contact Monitoring (2025) 2025 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd4.0 and IoT 2025 – Proceedings, pp. 151 – 156 DOI: 10.1109/MetroInd4.0IoT66048.2025.11121948
  • Crescini D., Sardini E., Serpelloni M., Piubeni G. Machine Learning Model Coupling PCA and PLSR for Predicting Moisture Content in Different Soil Textures Using Near-Infrared Spectroscopy (2025) IEEE Sensors Applications Symposium, SAS, (2025) DOI: 10.1109/SAS65169.2025.11105180
  • Mahraoui S., Serpelloni M. Wireless Instrumented Ankle Foot Orthosis (AFO) for Gait Cycle Monitoring: A Preliminary Study (2025) 2025 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd4.0 and IoT 2025 – Proceedings, pp. 89 – 94 DOI: 10.1109/MetroInd4.0IoT66048.2025.11122054 https://mauro-serpelloni.unibs.it/wp-content/uploads/Wireless-Instrumented-Ankle-Foot-Orthosis-AFO-for-Gait-Cycle-Monitoring-A-Preliminary-Study.pdf
  • Polidori G., Mahraoui S., Sardini E., Serpelloni M. Preliminary Study on Electrochemical Sensors for Ion Detection in Agriculture and Environment by Aerosol Jet Printing (2025) 2025 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd4.0 and IoT 2025 – Proceedings, pp. 232 – 237 DOI: 10.1109/MetroInd4.0IoT66048.2025.11122056
  • Polidori G., Mahraoui S., Serpelloni M. Ion-Selective Sensors with Interdigitated Electrodes by Aerosol Jet Printing for Biomedical and Industrial Fields: A Preliminary Investigation (2025) 2025 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd4.0 and IoT 2025 – Proceedings, pp. 145 – 150 DOI: 10.1109/MetroInd4.0IoT66048.2025.11122099

2024

2023

2022

  • Armando I., Borghetti M., Sardini E., Serpelloni M. A Computational Model For The Design Optimization Of Multi-Electrode Arrays By Aerosol-Jet Printing (2022) Procedia CIRP, 110 (C), pp. 87 – 92 DOI: 10.1016/j.procir.2022.06.018
  • Armando I., Borghetti M., Sardini E., Serpelloni M. Preliminary study on printed microelectrode array by Aerosol Jet Printing technology (2022) 2022 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2022 – Proceedings, pp. 261 – 266 DOI: 10.1109/MetroInd4.0IoT54413.2022.9831775
  • Fapanni T., Serpelloni M., Sardini E. Uncertainty Sources in Aerosol Jet Printed and Flexible Electrochemical Sensors (2022) 2022 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2022 – Proceedings, pp. 245 – 249 DOI: 10.1109/MetroInd4.0IoT54413.2022.9831522 https://mauro-serpelloni.unibs.it/wp-content/uploads/Uncertainty-Sources-in-Aerosol-Jet-Printed-and-Flexible-Electrochemical-Sensors.pdf
  • Tiziano F., Sardini E., Serpelloni M. A Preliminary Study on Flexible Temperature Sensors for Eskin Medical Devices (2022) 25th IMEKO TC-4 International Symposium on Measurement of Electrical Quantities, IMEKO TC-4 2022 and 23rd International Workshop on ADC and DAC Modelling and Testing, IWADC 2022, pp. 277 – 281 https://mauro-serpelloni.unibs.it/wp-content/uploads/A-Preliminary-Study-on-Flexible-Temperature-Sensors-for-Eskin-Medical-Devices.pdf

2021

  • Borghetti M., Cantu E., Sardini E., Serpelloni M. PVDF Piezoelectric Sensors on 3D low-Melting Point Substrates: A Preliminary Study on Paper (2021) Conference Record – IEEE Instrumentation and Measurement Technology Conference, 2021-May, art. no. 9459953 DOI: 10.1109/I2MTC50364.2021.9459953
  • Borghetti M., Cantu E., Sardini E., Serpelloni M. Preliminary study on wireless passive resistive sensor applied for smart objects (2021) 2021 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2021 – Proceedings, art. no. 9488452, pp. 150 – 155 DOI: 10.1109/MetroInd4.0IoT51437.2021.9488452
  • Borghetti M., Cantu E., Sardini E., Serpelloni M. Printed Sensors for Smart Objects in Industry 4.0 (2021) 6th International Forum on Research and Technology for Society and Industry, RTSI 2021 – Proceedings, pp. 57 – 62 DOI: 10.1109/RTSI50628.2021.9597209
  • Borghetti M., Cantu E., Sardini E., Serpelloni M., Ponzoni A. Preliminary analysis on a paper-based ammonia sensor for future food smart packaging (2021) 2021 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2021 – Proceedings, art. no. 9488540, pp. 140 – 144 DOI: 10.1109/MetroInd4.0IoT51437.2021.9488540
  • Borghetti M., Fapanni T., Lopomo N.F., Sardini E., Serpelloni M. A Preliminary Study on Aerosol Jet-Printed Stretchable Dry Electrode for Electromyography (2021) Lecture Notes in Electrical Engineering, 738, pp. 292 – 296 DOI: 10.1007/978-3-030-66729-0_36 https://mauro-serpelloni.unibs.it/wp-content/uploads/A-Preliminary-Study-on-Aerosol-Jet-Printed-Stretchable-Dry-Electrode-for-Electromyography.pdf
  • Fapanni T., Lopomo N.F., Sardini E., Serpelloni M. Novel Wearable System for Surface EMG Using Compact Electronic Board and Printed Matrix of Electrodes (2021) Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, 360, pp. 55 – 60 DOI: 10.1007/978-3-030-69963-5_4 https://mauro-serpelloni.unibs.it/wp-content/uploads/Novel-Wearable-System-for-Surface-EMG-Using-Compact-Electronic-Board-and-Printed-Matrix-of-Electrodes.pdf
  • Tonello S., Giorgi G., Narduzzi C., Fapanni T., Cantu E., Serpelloni M., Sardini E., Carrara S. Preliminary study of a flexible printed multi-sensing platform for electromyography and lactate measuring during rehabilitation (2021) 2021 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2021 – Conference Proceedings, art. no. 9478729 DOI: 10.1109/MeMeA52024.2021.9478729 https://mauro-serpelloni.unibs.it/wp-content/uploads/Preliminary_Study_of_a_Flexible_Printed_Multi-Sensing_Platform_for_Electromyography_and_Lactate_Measuring_during_Rehabilitation.pdf

2020

2019

Proceedings 2018

  • Abdullah, S., Serpelloni, M., Tonello, S., Sardini, E., Abate, G., Uberti, D. Spectrophotometer measurements to characterize conformational state of the proteins: P53 analysis (2018) MeMeA 2018 – 2018 IEEE International Symposium on Medical Measurements and Applications, Proceedings, art. no. 8438807, . DOI: 10.1109/MeMeA.2018.8438807
  • Bona, M., Bellitti, P., Sardini, E., Serpelloni, M. Study for the Integration of a Measuring System to an Automated Platform for Monitoring the Growth of Bacterial Cultures (2018) 2018 Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2018 – Proceedings, art. no. 8428321, pp. 264-268. DOI: 10.1109/METROI4.2018.8428321 Study for the integration of a measurement system to an automated platform for monitoring the growth of bacterial cultures
  • Bodini, A., Pandini, S., Sardini, E., Serpelloni, M. Design and fabrication of a flexible capacitive coplanar force sensor for biomedical applications (2018) 2018 IEEE Sensors Applications Symposium, SAS 2018 – Proceedings, 2018-January, pp. 1-5.  DOI: 10.1109/SAS.2018.8336775 Design and fabrication of a flexible capacitive coplanar force sensor for biomedical applications
  • Bodini, A., Cantu, E., Serpelloni, M., Sardini, E., Tonello, S. Design and implementation of a microsensor platform for protein detection realized via 3-D printing (2018) 2018 IEEE Sensors Applications Symposium, SAS 2018 – Proceedings, 2018-January, pp. 1-6. DOI: 10.1109/SAS.2018.8336743Design and implementation of a microsensor platform for protein detection realized via 3-D printing
  • Bona, M., Borghetti, M., Bellitti, P., Serpelloni, M., Sardini, E. A concept sensor-based system to be integrated in an existing automated platform monitoring bacterial growth (2018) 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches, ICE/ITMC 2017 – Proceedings, 2018-January, pp. 474-481. DOI: 10.1109/ICE.2017.8279923A concept sensor-based system to be integrated in an existing automated platform monitoring bacterial growth
  • Bona, M., Sardini, E., Serpelloni, M., Andò, B., Lombardo, C.O. Study on impedance behavior of a telemetric system operating with an inkjet-printed resistive strain gauge (2018) Lecture Notes in Electrical Engineering, 431, pp. 258-266. DOI: 10.1007/978-3-319-55077-0_34
  • Tonello, S., Serpelloni, M., Lopomo, N.F., Abate, G., Uberti, D.L., Sardini, E. Preliminary study of a low-cost point-of-care testing system using screen-printed biosensors for early biomarkers detection related to Alzheimer disease (2018) Lecture Notes in Electrical Engineering, 431, pp. 238-246. DOI: 10.1007/978-3-319-55077-0_32
  • Borghetti, M., Demori, M., Ferrari, M., Ferrari, V., Sardini, E., Serpelloni, M. Impedance sensors embedded in culture media for early detection of bacteria growth (2018) Lecture Notes in Electrical Engineering, 431, pp. 218-228. DOI: 10.1007/978-3-319-55077-0_29
  • Tiboni, M., Legnani, G., Lancini, M., Serpelloni, M., Gobbo, M., Fausti, D. ERRSE: Elbow robotic rehabilitation system with an EMG-based force control (2018) Mechanisms and Machine Science, 49, pp. 892-900. DOI: 10.1007/978-3-319-61276-8_95
  • Borboni, A., Serpelloni, M., Borghetti, M., Amici, C., Aggogeri, F., Fausti, D., Antonini, M., Mor, M., Sardini, E., Faglia, R. Hand robotic rehabilitation: From hospital to home (2018) Mechanisms and Machine Science, 49, pp. 877-884.  DOI: 10.1007/978-3-319-61276-8_93

Proceedings 2017

  • Bellitti, P., Bona, M., Borghetti, M., Sardini, E., Serpelloni, M. Flexible monitoring system for automated detection of bacterial growth in a commercial specimen processing platform (2017) RTSI 2017 – IEEE 3rd International Forum on Research and Technologies for Society and Industry, Conference Proceedings, art. no. 8065950, DOI: 10.1109/RTSI.2017.8065950Flexible monitoring system for automated detection of bacterial growth in a commercial specimen processing platform
  • Mekki, F., Borghetti, M., Sardini, E., Serpelloni, M. Wireless instrumented cane for walking monitoring in Parkinson patients (2017) 2017 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2017 – Proceedings, art. no. 7985912, pp. 414-419. DOI: 10.1109/MeMeA.2017.7985912 Wireless instrumented cane for walking monitoring in Parkinson patients
  • Bona, M., Borghetti, M., Sardini, E., Serpelloni, M. Novel telemetric technique for passive resistive sensors based on impedance phase angle measurement at constant frequency (2017) I2MTC 2017 – 2017 IEEE International Instrumentation and Measurement Technology Conference, Proceedings, art. no. 7969827, DOI: 10.1109/I2MTC.2017.7969827 Novel telemetric technique for passive resistive sensors based on impedance phase angle measurement at constant frequency
  • Khan, M.A., Serpelloni, M., Sardini, E. Optimized power harvesting module for an autonomous sensor system implanted in a total knee prosthesis (2017) I2MTC 2017 – 2017 IEEE International Instrumentation and Measurement Technology Conference, Proceedings, art. no. 7969717, DOI: 10.1109/I2MTC.2017.7969717 Optimized power harvesting module for an autonomous sensor system implanted in a total knee prosthesis
  • Negrini, S., Serpelloni, M., Amici, C., Gobbo, M., Silvestro, C., Buraschi, R., Borboni, A., Crovato, D., Lopomo, N.F. Use of wearable inertial sensor in the assessment of Timed-Up-and-Go Test: Influence of device placement on temporal variable estimation (2017) Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, 192, pp. 310-317. DOI: 10.1007/978-3-319-58877-3_40
  • Tonello, S., Marziano, M., Abate, G., Kilic, T., Memo, M., Uberti, D., Carrara, S., Lopomo, N.F., Serpelloni, M., Sardini, E. Enhanced sensing of interleukin 8 by stripping voltammetry: Carbon nanotubes versus fullerene (2017) IFMBE Proceedings, 65, pp. 213-216. DOI: 10.1007/978-981-10-5122-7_54 Enhanced Sensing of Interleukin 8 by Stripping Voltammetry Carbon Nanotubes versus Fullerene
  • Marziano, M., Tonello, S., Serzanti, M., Borghetti, M., Lopomo, N.F., Serpelloni, M., Pandini, S., Merlettini, A., Gualandi, C., Focarete, M.L., Messori, M., Toselli, M., Uberti, D., Memo, M., Dell’Era, P., Sardini, E. Carbon on poly(ε-caprolactone) (PCL) ink-jet printed sensor for monitoring cell cultures of myoblasts (2017) IFMBE Proceedings, 65, pp. 783-786. DOI: 10.1007/978-981-10-5122-7_196 Carbon on poly(ε-caprolactone) (PCL) Ink-jet Printed Sensor for Monitoring Cell Cultures of Myoblasts

Proceedings 2016

Proceedings 2015

  • Lancini, M., Serpelloni, M., Pasinetti, S. Instrumented crutches to measure the internal forces acting on upper limbs in powered exoskeleton users (2015) Proceedings – 2015 6th IEEE International Workshop on Advances in Sensors and Interfaces, IWASI 2015, art. no. 7184960, pp. 175-180. DOI: 10.1109/IWASI.2015.7184960
  • Bona, M., Sardini, E., Serpelloni, M. Modular acquiring system for lower limb rehabilitation machines (2015) Lecture Notes in Electrical Engineering, 319, pp. 415-419.
  • Sardini, E., Serpelloni, M. Wireless telemetric technique for resistive sensors in biomedical applications (2015) Lecture Notes in Electrical Engineering, 319, pp. 365-370.
  • Marioli, D., Sardini, E., Serpelloni, M. Power harvesting integrated in a knee implant for autonomous sensors implanted in human body (2015) 2015 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2015 – Proceedings, art. no. 7145248, pp. 462-466. 10.1109/MeMeA.2015.7145248 Power harvesting integrated in a knee implant for autonomous sensors implanted in human body
  • Dionisi, A., Marioli, D., Sardini, E., Serpelloni, M. Low power wearable system for vital signs measurement in all day long applications (2015) 2015 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2015 – Proceedings, art. no. 7145262, pp. 537-542. 10.1109/MeMeA.2015.7145262 Low power wearable system for vital signs measurement in all day long applications
  • Sardini, E., Serpelloni, M., Pasqui, V. Daylong sitting posture measurement with a new wearable system for at home body movement monitoring(2015) Conference Record – IEEE Instrumentation and Measurement Technology Conference, 2015-July, art. no. 7151345, pp. 652-657. 10.1109/I2MTC.2015.7151345 daylong sitting posture measurement with a new wearable system for at home body movement monitoring

Proceedings 2014

  • Cadei, A., Sardini, E., Serpelloni, M. Power management circuit analysis for an inductive energy harvester (2014) Lecture Notes in Electrical Engineering, 268 LNEE, pp. 325-329.
  • Dionisi, A., Sardini, E., Serpelloni, M. Printed sensors on textiles for biomedical applications (2014) Lecture Notes in Electrical Engineering, 268 LNEE, pp. 439-442.
  • Dionisi, A., Borghetti, M., Sardini, E., Serpelloni, M. Biocompatible inkjet resistive sensors for biomedical applications(2014) Conference Record – IEEE Instrumentation and Measurement Technology Conference, art. no. 6861021, pp. 1629-1633. Biocompatible inkjet resistive sensors for biomedical applications
  • Bona, M., Sardini, E., Serpelloni, M. Telemetric model for passive resistive sensors in biomedical applications(2014) Procedia Engineering, 87, pp. 444-447. Telemetric Model for Passive Resistive Sensors in Biomedical Applications
  • Sardini, E., Serpelloni, M., Pandini, S. Analysis of tongue pressure sensor for biomedical applications (2014) IEEE MeMeA 2014 – IEEE International Symposium on Medical Measurements and Applications, Proceedings, art. no. 6860031, . Analysis of Tongue Pressure Sensor for Biomedical applications
  • Sardini, E., Serpelloni, M. Wearable posture monitoring sensor (2014) Lecture Notes in Electrical Engineering, 162 LNEE, pp. 255-259. DOI: 10.1007/978-1-4614-3860-1_45.
  • Dionisi, A., Sardini, E., Serpelloni, M., Pasqui, V. Instrumented shirt to evaluate classical human movements (2014) IEEE MeMeA 2014 – IEEE International Symposium on Medical Measurements and Applications, Proceedings, art. no. 6860042, . Instrumented shirt to evaluate classical human movements
  • Borghetti, M., Sardini, E., Serpelloni, M. Evaluation of bend sensors for limb motion monitoring (2014) IEEE MeMeA 2014 – IEEE International Symposium on Medical Measurements and Applications, Proceedings, art. no. 68600127, . Evaluation of Bend Sensors for Limb Motion monitoring
  • Sardini, E., Serpelloni, M. T-shirt for vital parameter monitoring (2014) Lecture Notes in Electrical Engineering, 162 LNEE, pp. 201-205. DOI: 10.1007/978-1-4614-3860-1_35.
  • Luciano, V., Sardini, E., Serpelloni, M. An electromechanical generator implanted in human total knee prosthesis (2014) Lecture Notes in Electrical Engineering, 162 LNEE, pp. 25-30.
  • Borghetti, M., Sardini, E., Serpelloni, M. Preliminary study of resistive sensors in inkjet technology for force measurements in biomedical applications (2014) 2014 IEEE 11th International Multi-Conference on Systems, Signals and Devices, SSD 2014, art. no. 6808790, . Preliminary study of resistive sensors in inkjet technology for force measurements in biomedical applications
  • Sardini, E., Serpelloni, M., Lancini, M., Pasinetti, S. Wireless instrumented crutches for force and tilt monitoring in lower limb rehabilitation (2014) Procedia Engineering, 87, pp. 348-351. Wireless Instrumented Crutches for Force and Tilt Monitoring in Lower Limb Rehabilitation

Proceedings 2013

Proceedings 2012

Proceedings 2011

Proceedings 2010 

Proceedings 2009

Proceedings 2008

Proceedings 2007

Proceedings 2006

Proceedings 2005

 

 

 

IMPORTANT
All articles are under copyright. Permissions are required as reported in:
http://iopscience.iop.org/page/copyright
http://www.elsevier.com/wps/find/supportfaq.cws_home/copyright
http://www.ieee.org/publications_standards/publications/rights/index.html